The SOEKS EcoVisor F4 is a 4-in-1 testing device that is designed to:
SOEKS EcoVisor F4 performs express analysis of nitrate content in fresh fruit and vegetables. Nitrate content analysis is based on conductivity of alternating high-frequency current in the measured product (ionometry).
SOEKS EcoVisor F4 defines radiation background level and identifies radioactive contaminated foods and construction supplies. The Ecotester can easily assess the level of radioactivity according to the power level of ion radiation (gamma radiation and beta particles flux).
SOEKS EcoVisor F4 records the electromagnetic field in facilities, living areas and from domestic appliances. When electromagnetic fields are detecting, electric and magnetic field intensities evaluate.
SOEKS EcoVisor F4 evaluates water quality. The analysis is based on measurement of high-frequency alternating current conductivity.
SOEKS EcoVisor F4 Specifications:
|Name of specification||Indication|
|Nitrate Tester – Nitrate measurement|
|Scale range of possible nitrate content, mg/kg||from 20 to 5 000|
|Temperature compensating, C||From 0 to 30|
|Measurement uncertainty, max||± 12%|
|Dosimeter – Radiation measurement|
|Measurement units||Sievert Roentgen|
|Scale range of possible radiation background mSv/h||up to 1 000|
|Scale range of possible radiation background mR/h||up to 100 000|
|Registered gamma ray energy, eV||from 0,1|
|Warning thresholds, mSv/h|
Warning threshold, mR/h
|From 0,1 to 100|
from 10 to 10 000
|Warning threshold of accumulated dose|
|Time of accumulated dose, days||Up to 1 000|
|EMF meter – Electromagnetic Field measurement|
|Scale range of electric field frequency, hz||From 20 to 2000|
|Scale range of magnetic field (magnetic induction) intensity crest value, A/m (meTl)||From 0,08 to 20|
(From 0,10 to 25)
|Max. permissible relative measurement uncertainty of magnetic field intensity, %||± 18%|
|Scale range of magnetic field intensity crest value, V/m||From 10 to 5000|
|Max. permissible relative measurement uncertainty for electric field, %||± 18%|
|TDS meter – Water quality measurement|
|Scale range ppm (mg/l)||Up to 5000|
|Resolution ppm (mg/l)||10|
|Temperature compensating, C||From 0 to 30|
|Measurement uncertainty, from full scale||± 12%|
|Operating time including hibernation, hours||Up to 24|
|Power supply||AAA batteries or accumulator|
|Power supply range, V||2.2 – 3.5|
|Overall dimensions Height x Width x Thickness, max, mm||147 x 54 x 21|
|Device mass (with power supply) , max, grs||95|
|Battery charging current, max, mA||300|
|Current from power supply or USB , max, mA||500|
|Charger output voltage, V||From 4.5 to 5.5|
|Display||Color touchscreen TFT 320 x 240|
|Operating temperatures range, °С||From 0 to +40|
The Device SOEKS EcoVisor F4
Main parts of the device consist of:
1. Micro USB slot for charging the accumulator.
2. Touchscreen for displaying information and menu navigation.
3. OK button for switching the device on/off, confirmation button.
4. LEFT button for menu navigation, return to previous menu when pressing for 2 seconds.
5. RIGHT button – menu navigation.
6. Measuring probe inserts in the product to measure nitrate content level.
7. Protective cap protects the probe.
Measurement of nitrate content level is based on the patented technology of a biobased product ionometry (Patent of invention № 23 90 767 Ionometry Method for biobased products and the device for its performance) and has been developed by the SOEKS company.
The technology is based on a specialized procedure method that puts high-frequency electric current through pulp.
Every plant contains ions of potassium, magnesium, ferrum (iron), cuprum, chlorine, plenty of organic acids and other elements in certain amounts that are necessary for proper growth.
The amount of every single element (ionic or molecular) is determined by bio organics of certain plant (it has a basic level of ion concentration) and by contents of water and soil where the plant grows.
People often use fertilization for efficient growth of plants. For instance, saline fertilizers such as nitrates and phosphates. As they break down and the plant easily absorbs these fertilizers.
As it spreads around the plant, saline ions (nitrates, phosphates and etc.) accumulate in different plant parts including fruits. This leads to higher amount of electrolytes and to higher electrical conductivity of fruit as well.
SOEKS EcoVisor F4 has mastered the measurement of nitrate ions content in fruits and vegetables. A percentage of these in fruit and vegetables is identified by an independent analysis method (potentiometric identification of nitrate content according to Russian National Standard (GOST) “Fruit and vegetables recycling products. Nitrate content identification”).
The result of express analysis is shown by the device in the form of nitrate ion concentration and its comparison to maximum permissible concentration for certain product. The device measures the nitrate concentration per kilogram of product netto. 200-300 mg of nitrates eaten within 24 hours is considered to be safe for an adult. If 600-700 mg is eaten within 24 hours, nitrates are considered toxic.
For instance, when measuring a beetroot, the device shows 1000 mg of nitrates per kg. According to the standard measurement, it is safe to only eat 200-300 mg of this beetroot without damaging your health.
When measuring a watermelon, the device shows 350 mg/kg. If a person eats 2 kg of watermelon, he or she will consume 700 mg (350 mg/kg x 2 kg) which is toxic.
One should also understand that the shown result is evaluative and cannot be compared to quantified chemical analysis at an advanced laboratory. That kind of analysis requires a lot of time and is not free. Nevertheless, the presence of such laboratory and qualified analytical chemist at home is impossible for the majority of people. The EcoVisor F4 is a like portable lab that allows you to avoid buying suspicious products. This will help protect yourself, your relatives and children from being exposed to these poisonous products.
The nitrate tester analysis takes only a few seconds. The only maintenance it requires is to change the battery or charge the accumulator just as you would your mobile phone.
Of course, you may ask yourself is there an increased electrical conductivity if a fruit or vegetable does not contain nitrate ions? This is possible. But will the consumer feel safer buying a product with increased amount of phosphates or any other ions instead of nitrates or when buying a product that is already going bad? One should not forget that basic electrical conductivity is determined for every single type of fresh fruit or vegetable. When a product goes bad, the content and concentration of organic acids change.
ATTENTION! We strongly do not recommend to measure nitrate content in liquids, chemically and heat-treated products, products that are not included in the device’s menu list. Received data will be misleading and uncertain.
One should also remember that the device is designed for measuring products at a room temperature. Change of the product temperature can increase measurement uncertainty. This regards to products that have just been taken out of fridge or have been exposed to sun rays. In SOEKS EcoVisor F4 there is a function of thermal compensation, which is achieved by means of embedded temperature gauge in probe of the device. Thanks to software patches, when measuring you can get the same measurement result even when temperatures of measured products are different.
There are fruit and vegetables in the list of Nitrate tester, which contain air cavities (for instance, sweet pepper). When measuring such products, it is important not to insert the probe into the air cavity. When the probe is inserted into the air cavity, the measurement result will be misleading.
Radiation measurement – Dosimeter EcoVisor F4
Some chemical elements (so called radioactive isotopes) contain unstable nucleus that decay into small elementary particles or quanta. Detachment of elementary particles or quanta is called radiation.
Radiation is ionizing, because it leads to atomic ionization of substance that is struck by radiation. Ionization is called the process of striking one or a few electrons out of atom. After that, nucleus and left electrons create a system that is positively charged and is called an ion.
Ionized atoms strongly differ from average nucleus. Ions destroy other molecules by breaking a bond between nucleuses. That is the reason why ionized radiation influence on human’s health is harmful.
Radiation influence on the human body is called irradiation. Irradiation transpierces any body tissues and ionizes their particles and molecules. This leads to creation of ionized nucleuses (ions or so-called free radicals) that destroy molecules and lead to inclusive death of tissue cells.
As it was said before, nuclear disintegration into elementary particles is accompanied by radiation of these particles. This radiation is divided into following types:
- Alpha decay (alpha particles) are inert helium nucleus, the most massive particles.
- Beta decay (beta particles) are electrons that move with an enormous speed. They are able to penetrate our body for a few centimeters.
- Gamma decay (gamma particles) consist of gamma ray quantum, which although are considered to be particles, represent at the same time electromagnetic radiation such as sunlight, radio waves and x-rays. Their differences consists only of a big energy that every gamma quantum carries. Gamma decay always spreads with the light velocity when other particles are not that speedy. In comparison with alpha and beta particles, you need more materials such as concrete or lead in order to protect yourself from gamma decay.
X-rays are electromagnetic radiation (just like gamma decay) but it has less energy. In everyday life, it is used only at medical institutions.
Neutron radiation is an uncharged particle streams (neutrons). It occurs only in nuclear reactors.
Modern domestic dosimeters measure radiation in micro Sieverts per hour (mSv/h) and micro roentgen per hour (mcR/h).
The radiation dose absorbed by human’s body is measured in micro Sieverts and the radiation dose in the air at measurement spot is measured in micro roentgen.
To estimate the radiation influence on the human body, the concept of equivalent dose is used. Equivalent dose is an amount of energy absorbed by mass unit of biological tissue considering biological danger of this radiation type. The unit of measurement for equivalent dose is the Sievert (Sv).
To estimate the influence of gamma decay which are the most absorbed radiation type and give most impute to human exposure, the concept of air radiation dose is used. It has its own unit of measurement – roentgen (R).
There is no natural radiation background standard because radiation background depends on the region, district and amount of radioactive particles that are found in objects around. For instance, radiation background at highlands is always higher than at low land.
SOEKS EcoVisor F4 measures radiation in micro Sieverts per hour (mSv/h) and micro roentgen (mcR/h), where 0.01 mSv/h corresponds to 1 mcR/h according to biological radiation effect.
Natural radiation background usually ranges from 0.08 mSv/h till 0.18 mSv/h. Safe radiation background level for a human is considered to be up to 0.4 mSv/h (the 0.4 mSv/h exposure per hour).
When Level of Radiation is exceeded (more than 0.4 mSv/h), the recommended time of staying in an irradiation area is regressive. The Radiation Level amounts to 0.4 mSv/h, you can stay in the irradiation area for one hour. If the Radiation Level amounts to 0.8 mSv/h, you can stay in irradiation area for half an hour. Duration of stay in area with 1.6 mSv/h radiation amounts shouldn’t exceed 15 minutes and so on.
Electromagnetic Field Measurement – EMF meter EcoVisor F4
Electromagnetic field (EM field) is a special form of matter which measures the interaction of charged particles. It represents interrelated alternating electric and magnetic fields. EM field spreads from one space point to another in form of electromagnetic progressive waves running from source.
EM field is created of particle charges. For example, in physics, students do experiments with ebonite electrification to demonstrate the electric field.
Magnetic field is created when electrical charges move through a conductor.
In order to characterize electric field strength, we use “electric field intensity” definition (mark sign – E, measurement unit – V/m (Volt per meter)). Magnetic strength is characterized by N magnetic field strength, measurement unit – A/m (Ampere per meter). When measuring very low and extremely low frequency, “magnetic density” definition is often used (mark sign – V, measurement unit – Tl (Tesla)).
Electromagnetic Field Influence on Human’s Health
Experimental Data of Russian and foreign research show that electromagnetic fields are highly bioactive and can negatively affect our health.
Many researches of EM field’s biological effect allow us to detect the most susceptible body systems: nervous, immune, endocrine and reproductive systems. These body systems are critical in our daily function.
EM fields influence water rich body organs mostly which are the eyes, brain, stomach and kidneys.
The following are symptoms of high EM field exposure can cause fatigue, irritability, sleep disorders, memory impairment and lack of attention.
The biological effect of EM fields tends to accumulate and can consequentially cause the degenerative process of the central nervous system, blood cancer (leukemia), encephaloma and endocrine system.
EM fields are especially dangerous for children, pregnant women, people with disorders of central nervous, the endocrine or cardiovascular system, allergic individuals and people with a compromised immune system.
Research has shown that the nervous system of the human body is the most sensitive to EM fields. When affected, it can cause serious malfunctions at the neuronal level, neural synapse and isolated neural structures. People who are in contact with electromagnetic fields, eventually face memory and higher nervous activity disorders.
Nowadays it is experimentally proven that electromagnetic fields negatively affect immunologic reactivity of body. Research data points to the fact that immunogenesis processes are violated and suppressed when being affected by electromagnetic fields.
When being affected by electromagnetic fields, changes in the pituitary adrenal system may occur. When being affected by electromagnetic fields, pituitary adrenal system is stimulated and therefore the amount of adrenalin in the blood rises and can trigger blood clotting. It is acknowledged that hypothalamus – pituitary – adrenal cortex system reacts on environmental interaction immediately and consistently.
Reproductive system disorders are usually connected with changes in its regulation within the nervous and neuroendocrine systems. This has been shown in research concerning the pituitary gonadotropic activity condition as it is affected by electromagnetic fields. Continuous EM field irradiation leads to lower pituitary activity.
Many scientists refer EM fields to teratogens that influence women’s health during pregnancy and fetus development. It is thought that electromagnetic fields can, for example, lead to physical defects of fetus. The fetus is very vulnerable at infancy during period of implantation and early organogenesis.
It is proven that fetus sensitivity to EM field is notably higher in mothers and may cause damage during it’s development. Results of epidemiological studies allow us to estimate that pregnant women who are in contact with electromagnetic field might suffer from premature birth. It might negatively affect fetus development and even cause congenital malfunctions of fetus.
Electromagnetic Field in Facilities
Electric field strength of 50 Hz commercial frequency in facilities (at 0.2 m distance from windows and walls, 0.5-1.8 m high from floor) should not exceed 500 V/m (kilovolt per meter).
Magnetic field strength of 50 Hz commercial frequency in facilities (at 0.2 m distance from windows and walls, 0.5-1.5 m high from floor) should not exceed 10 mcTl (microtesla).
Electric and magnetic fields of 50 Hz commercial frequency can be evaluated when domestic appliances are turned off and local lighting is turned on. The electric field is evaluated when ambient lighting is off and magnetic field is evaluated when ambient lighting is on.
Electromagnetic Field in Living Area
The electrical field of 50 Hz commercial frequency from overhead transmission lines and other objects on the territory of residential constructions should not exceed 1 kV/m (kilovolt per meter) 1.8 m high from ground.
The magnetic field strength of 50 Hz commercial frequency from overhead transmission lines and other objects on the territory of residential constructions should not exceed 25 mcTl (microtesla) 1.8 m high from ground.
Electromagnetic Field from Domestic Appliances
In home, domestic appliances are sources of electromagnetic exposure. A person should evaluate their effect at a distance 10 ± 0.1 cm while standing in front, behind and next to the object (except TV).
Electromagnetic field from TV with a diagonal less than 51 cm (20”) is measured at a distance of 50 ± 1 cm in front, behind and next to the TV. When screen diagonal is more than 51 cm, the EM field is measured the same way at a distance of 100 ± 1 cm. The device must be preliminarily turned on and work at least 20 minutes before measuring.
Electromagnetic Field from PC
The electrical field strength from PC ranging from 5 Hz to 2000 Hz should not exceed 25 V/m (volt per meter). The magnetic flux density from a PC ranging from 5 Hz to 2 KHz should not exceed 0.25 mcTl (microtesla).
Electromagnetic field is measured at 50 cm distance from the screen.
Water Measurement (Quality Evaluation) – TDS Meter EcoVisor F4
Water quality measurement is intended for quality evaluation of drinking water, as well as of water from treatment systems such as hydroponics, fish tanks, swimming pools, domestic appliances and from water wells.
The device measures the amount of solid particles that have been dissolved in water (TDS- total dissolved solids) per 1 million water particles – ppm (parts per million).
Among water particles, there is an enormous amount of dissolved water impurities in it. The main impurities are both inorganic salts (such as chlorides, sulfate bicarbonate of calcium, sodium, magnesium, potassium) and a small amount of organic substances.
The amount of dissolved in water solid particles depends on natural environment and varies from region to region. In the city, water content is influenced by it’s industrial drainage, rainfall drainage, chlorination etc.
Solids dissolved in water determine our water quality and can affect our bodily functions.
Potassium and magnesium salts affect water hardness. High levels of these elements can worsen the water’s taste, smell, muddiness etc. Hard water negatively affects digestive system, hair and skin when we shower. It can also cause kidney diseases.
With the help of EcoVisor F4 now, it is possible to determine whether the water is suitable for drinking, domestic needs or if it requires purification.
EcoVisor F4 can be used for evaluation of water filter efficiency. In addition, EcoVisor F4 is used for reverse osmosis filter. Such filters have a few filtration levels. One of them is represented by reverse-osmosis membrane which stops water impurities that cannot be stopped by other filters. This membrane’s service life period depends on amount of impurities in stream water. If the membrane clogs, it can lead to its mechanical damage and the whole filtration system can break down.
EcoVisor F4 can measure the amount of solid particles entering and exiting the filtration system and record its indication. If the amount of salts when exiting has increased, it is time to wash and change the membrane.
In addition, EcoVisor F4 is used in aquaristics. The device can pick water with necessary amount of solids.
Moreover, EcoVisor F4 can be used when watering plants and flowers. Harsh water can negatively affect plants because it increases concentration of lime in the ground. As the result, the ground becomes alkaline and blocks the nutrition for the plants.
Water with high amount of solids is harmful for domestic appliances (washing machines, coffee machines, and irons with steam generator, kettles, dishwashers and boilers). In all of these devices, there is a heating spiral. The scale on the heating spiral can overheat and breakdown. The EcoVisor F4 can help to evaluate quality of water in domestic appliances and take precautions when using it in the future.